5 common detection methods for plant extracts
At present, there are five common detection methods for plant extracts, namely: high performance liquid chromatography (HPLC), ultraviolet absorption spectroscopy (UV), thin layer chromatography (TLC), gas chromatography (GC) and atomic absorption spectroscopy (AAS).
The principle and application of each method is different. Among them, HPLC and UV are common detection methods for standard plant extracts, TLC is used for the detection of proportional plant extracts, GC is used to detect volatile liquids or oils, and AAS is used for the detection of heavy metal content of extracts.
1. High performance liquid chromatography (HPLC)
HPLC is High Performance Liquid Chromatography, also known as "high-pressure liquid chromatography", "high-speed liquid chromatography", "high-resolution liquid chromatography", "modern column chromatography" and so on. High performance liquid chromatography is an important branch of chromatography, with liquid as mobile phase, using high-pressure infusion system, a single solvent with different polarity or mixed solvents and buffers with different proportions are pumped into the column equipped with a stationary phase, and after the components in the column are separated, they enter the detector for detection, so as to realize the analysis of the sample. This method has become an important separation and analysis technology in the fields of chemistry, medicine, industry, agriculture, commodity inspection and forensic inspection. High performance liquid chromatography (HPLC) is an analytical method developed in the late 60s of the 20th century. In recent years, it has been widely used in the separation and determination of health food functional ingredients, nutritional enhancers, vitamins, and proteins. About 80% of the world's organic compounds can be analyzed and determined with HPLC.
1.1 Flow of high performance liquid chromatography analysis
The solvent in the reservoir bottle is drawn into the chromatography system by a pump, then output, and after flow and pressure measurement, it is introduced into the sampler. The analyte is injected by the injector, passed through the column with the mobile phase, separated on the column and entered the detector, and the detection signal is collected and processed by the data processing equipment and the chromatogram is recorded. The waste liquid flows into the waste bottle. In the case of complex mixture separation (wide polarity range), gradient controllers can also be used for gradient elute. This is similar to the procedure of gas chromatography, except that gas chromatography changes the temperature.
HPLC, on the other hand, changes the polarity of the mobile phase so that the components of the sample can be separated under optimal conditions.
1.2 Separation process of high performance liquid chromatography
Like other chromatographic processes, HPLC is a continuous multiple exchange of solutes between the stationary and mobile phases. It separates different solutes by the difference in exclusion caused by the partition coefficient, affinity, adsorption force or molecular size of the solute between the two phases.
Start the sample on the stigma, assuming that the sample contains 3 components, A, B, and C, enter the column along with the mobile phase and begin distribution between the stationary and mobile phases. Component A with a small partition coefficient is not easily retained by the stationary phase and flows out of the column early. Component C with a large partition coefficient has a long residence time on the stationary phase and elutes out of the column late. The partition coefficient of component B is between A, C, and the second flows out of the column. If a mixture containing multiple components enters the system, the components in the mixture flow out of the column according to their different distribution coefficients between the two phases to achieve the purpose of separation.
The separation of different components in the chromatographic process depends first on whether there are differences in the partition coefficient, adsorption capacity, affinity, etc. of each component between the two phases, which is a thermodynamic equilibrium problem and the primary condition for separation. Secondly, when different components move in the column, the band broadens with the column length, and the separation is related to the diffusion coefficient between the two phases, the size of the stationary phase particle size, the packing of the column, and the flow rate of the mobile phase. Therefore, the final effect of separation is a comprehensive benefit of thermodynamics and kinetics.
2. Ultraviolet absorption spectroscopy (UV)
UV detection method is also one of the commonly used detection methods for plant extracts, UV is the abbreviation of the English name ultraviolet, UV detection is also known as ultraviolet detection method, ultraviolet spectrum detection method. UV detection method is mainly used for the determination of complex composition and its stability constant, quantitative analysis of structural analysis, qualitative analysis of the scope of application, definition of ultraviolet spectrum, is a spectrum produced by certain valence electrons in the molecule absorbing electromagnetic waves of a certain wavelength, jumping from low energy level to high energy level, when the electrons in the molecule absorb energy, they will transition from the ground state to the excited state, and then release energy (radiate the characteristic spectral lines) and return to the ground state; The wavelength that radiates the characteristic general line is called ultraviolet spectroscopy (UV) in the ultraviolet region
The UV light comes from a mercury UV lamp, which is obtained through a sapphire window and process flow. With the exception of specific UV wavelengths, narrow bands block all transmitted light through UV filters. This UV light can pass through filters as well as test detectors to record only specific UV wavelengths.
2.1 UV qualitative analysis
In the qualitative analysis of organic compounds, UV-Vis spectroscopy is suitable for the identification of unsaturated organic compounds, especially conjugated systems, to infer the skeleton structure of unknowns. In addition, it can be used in conjunction with infrared spectroscopy, nuclear magnetic resonance spectroscopy, and mass spectrometry for qualitative identification and structural analysis, so it remains a useful adjunct. There are generally two qualitative analysis methods, comparing the absorption spectrum curve and calculating the maximum absorption wavelength λmax with empirical rules, and then comparing it with the measured value. Structural analysis?? Structural analysis can be used to determine the configuration and conformation of a compound. Such as distinguishing cis- and trans- isomers and tautomers.
2.2 UV quantitative analysis
UV-Vis spectrophotometric analysis is based on the Lambert-Beer law, which states that the absorbance of a substance to be measured at a certain wavelength has a linear relationship with its solubility. Therefore, the concentration and content of the substance in solution can be found by measuring the absorbance of the solution to the incident light of a certain wavelength. The commonly used measurement methods are: one-component quantification, multi-component quantification, dual-wavelength method, differential spectrophotometry and derivative spectroscopy. Determination of complex composition and their stability constants ?? There are two common methods for measuring the composition of complexes: the molar ratio method (also known as the saturation method) and the isomolar continuous change method (also known as the Job method). Determination of acid-base dissociation constant? Photometry is a common method for determining the dissociation constant of indicators or chromogens used in analytical chemistry, especially for weak acids or bases with low solubility.
Thin layer chromatography (Thin Layer Chromatography) is commonly represented by TLC, also known as thin layer chromatography, which belongs to solid-liquid adsorption chromatography. It is a micro, fast and simple chromatography method developed in recent years, which combines the advantages of column chromatography and paper chromatography. On the one hand, it is suitable for the separation of small samples (a few to tens of micrograms, or even 0.01 μg); on the other hand, if the adsorption layer is thickened and the sample is dotted into a line when making thin layer plates, up to 500mg of samples can be separated. Therefore, it can be used to refine samples. Therefore, this method is especially suitable for materials with low volatility or easy to change at higher temperatures and cannot be analyzed by gas chromatography. In addition, when carrying out chemical reactions, thin layer chromatography is often used to observe the gradual disappearance of raw material spots to determine whether the reaction is complete.
Thin layer chromatography is to uniformly apply a layer of adsorbent or support agent on the washed clean glass plate (about 10×3cm), with drying, activation and then the sample solution is added dropwise with a flat capillary at the mouth of the tube to the starting line about 1cm from one end of the thin layer plate, cool-dried or blow-dried after the thin layer plate is placed in the unfolding tank containing the developing agent, immersion depth of 0.5cm. When the leading edge of the developing agent is about 1 cm from the tip, the chromatographic plate is removed, dried and sprayed with color developer, or color developed under ultraviolet light. Thin layer chromatography, also known as thin plate chromatography, is a kind of chromatography, is a very important experimental technique for rapid separation and qualitative analysis of a small number of substances, belongs to solid-liquid adsorption chromatography, it has both the advantages of column chromatography and paper chromatography, on the one hand, suitable for a small number of samples (a few to a few micrograms, Even 0.01 micrograms); on the other hand, when making thin layer plates, the adsorption layer is thickened and increased, so it can be used to refine samples, which is especially suitable for substances with less volatility or higher temperatures that are easy to change and cannot be analyzed by gas chromatography. In addition, thin layer chromatography can be used to track organic reactions and as a kind of "pre-test" prior to column chromatography.
GC: Gas Chromatographic gas chromatography uses gas as the mobile phase. According to the different stationary phases used, it can be divided into two categories: the stationary phase is solid, called gas-solid chromatography; If the stationary phase is liquid, it is called gas-liquid chromatography.
A gas chromatography system consists of an adsorbent contained in a tube column, or a stationary phase coated with a liquid on an inert solid, and a mobile phase of a gas continuously passing through the tube column. After the sample to be separated and analyzed is added from one end of the tube column, due to the different adsorption or dissolution ability of each component in the fixed relative sample, that is, the partition coefficient of each component between the stationary phase and the mobile phase is different, when the components are repeatedly distributed in the two phases and move forward with the moving phase, the speed of movement of each component along the tube column is different, and the components with small distribution coefficients are held by the stationary phase for a short time, and can flow out from the end of the column faster. The time t after injection is plotted by the concentration c of each component flowing from the end of the column, and the resulting plot is called chromatogram. When the chromatography process is flushed, the retention time tR required for components to flow out of the column at their maximum concentration after injection is related to the time tM of the components passing through the column space and the adjusted retention time tT when the components are trapped in the column:
where the ratio of t-annoyance to tM indicates how many times longer the component stays in the moving phase compared to the fixed one, called the capacity factor k:
From the chromatogram, it can also be seen that the chromatographic peak flowing from the back of the column is not rectangular, but a curve that approximates the Gaussian distribution, which is due to the presence of eddy current diffusion, longitudinal diffusion, and mass transfer resistance as the components move through the column, resulting in regional expansion. There are two ways to store the stationary phase in the column, one is to hold a granular sorbent in the column, or to hold an inert solid particle coated with a stationary solution (carrier or carrier (Table 2)); The other is to apply or chemically crosslink the fixative solution to the inner wall of the capillary column. Columns prepared with the former method are called packed columns, and columns prepared with the latter method are called capillary columns (or open-tube columns).
The column efficiency is often expressed by borrowing the column concept of the distillation method, such as using "the height equivalent to a theoretical column" H or the "number of columns" n to represent the column efficiency. For filled columns:
For open columns:
where ω┩ is the half-height and width of the chromatographic peak, because the distribution isotherms of the components of gas chromatography in the stationary liquid are mostly linear, if the injection volume is small, the resulting chromatographic peak outflow curve is originally described by the Gaussian normal distribution, and its mathematical expression is:
Now both experimentally and theoretically proved that the chromatographic peak shape of the substance is asymmetric and tailed, it is more accurate to use the exponential attenuation-corrected Gaussian distribution as a distribution function to describe the chromatographic peak shape:
where A represents the peak area; tG indicates the central position of Gaussian Peak; σ represents the standard deviation of Gaussian peak; τ represents the time constant of the exponential decay function; t′ is the integral variable.
As pointed out above, the partition coefficients of the two components must be different in order for their chromatographic peaks to be separated. With the difference, the column efficiency n required for separation is also different, so to distinguish the separation of two chromatographic peaks (Figure 2), it is also necessary to use the total column separation efficiency index R:
The relationship between n and R is:
where α′ is the relative retention value of the component; α is the relative retention value of the component correction. As can be seen from the above equation, after selecting a suitable stationary solution and a column with a given number of columns, the α′ value should be adjusted by changing the column temperature to meet the degree of separation of the two components to a given R value.
Atomic Absorption Spectrometry (AAS), full name is Atomic Absorption Spectrometry
AAS Fundamentals:
The atoms of each element can not only emit a series of characteristic lines, but also absorb and emit line waves, atomic absorption spectroscopy schematic
Characteristic lines of the same length. When a certain characteristic wavelength of light emitted by the light source passes through the atomic vapor, that is, the frequency of the incident radiation is equal to the energy frequency required for the electrons in the atom to transition from the ground state to the higher energy state (generally the first excited state), the outer electrons in the atom will selectively absorb the characteristic spectral lines emitted by their same elements, so that the incident light is weakened. The degree to which the characteristic spectral line is weakened by absorption is called absorbance A, which is proportional to the content of the measured element: where K is constant; C is the sample concentration; I0v is the intensity of the original light source; Iv is the intensity of the characteristic spectral line after absorption. According to the above formula, the absorbance of the unknown specimen can be measured and quantified against a standard series curve of known concentration. Since atomic energy levels are quantized, the absorption of radiation by atoms is selective in all cases. Due to the different atomic structure of each element and the arrangement of the outer electrons, the energy absorbed by the element when it transitions from the ground state to the first excited state is different, so the resonance absorption line of each element has different characteristics. The atomic absorption spectrum is located in the ultraviolet and visible regions of the spectrum.
Attachment:
RELATED NEWS
Botanical Research Collaboration Program
To advance scientific innovation in the field of natural plant‑based medicine in the Qinba region and to support researchers in conducting studies on bioactive plant compounds, evaluating product applications, and translating research findings into practical outcomes, Ankang Kangyuan Pharmaceutical Technology Co., Ltd. is now offering free product‑development samples of its plant extracts to universities, research institutes, and specialized R&D organizations.
Enhance exchanges, win-win cooperation |Guangdong delegation visited Kangyuan Pharmaceutical
On April 28, 2023, Chen Ming, chairman of Dongguan Chengming Adhesive Co., Ltd., director of Dongguan Chengming Hot Melt Adhesive Museum, Wang Xiansheng, financial director of Dongguan Chengming Adhesive Co., Ltd., Liu Xiaoyan, administrative assistant of Dongguan Chengming Adhesive Co., Ltd., Wang Dong, general manager of Shenzhen Heyi Engineering Management Consulting Co., Ltd., and other delegations carried out deep processing of Qinba-rich selenium konjac as raw materials. Using the characteristics of konjac extract glucomannan (Glucomannan) to embed probiotics, further develop and produce high-end functional health biological product projects, visit Ankang Kangyuan Biotechnology Co., Ltd.! Hanbin District Government of Ankang City, Shaanxi Province, Hanbin District Economic and Trade Bureau, Hanbin District Ecological Environment Branch, Hanbin District Wuli Industrial Concentration Zone (Chengdong New District) Management Committee, Hanbin District Investment Service Center, Hanbin District Development and Investment Group and other leaders accompanied the investigation!
Customs leaders visited Ankang Kangyuan Pharmaceutical Technology Co., Ltd. to guide the work
In the fourth month of the human world, the fragrant fragrance is gone, and the peach blossoms in the mountain temple are in full bloom!
We adhering to the talent concept of allowing those who want to do things to have opportunities, those who can do things have a stage, people who can do things have status and treatment, only talent, real talents must be used, welcome every colleague who loves medicine to join, Kangyuan company will provide you with a broad development platform, let us build the company into a national well-known high-quality traditional Chinese medicine raw material supplier enterprise!
Warm Spring March, love accompanies - Women's Day, tribute to every amazing "you"
In this festival that belongs only to you, May the spring rain wash away your weariness, May the spring breeze blow away your troubles, May spring flowers bring you happiness. May you all be in a good mood all spring! May you all be happy and sweet throughout the four seasons!
The sky is clear, the clouds are not clean, the distant mountains contain dai, and the wind sends warmth. On March 3, 2023, Palm Creek Town, Xunyang City, organized by Qu Xuan, the town secretary, led by various section-level leaders and industry tables, the president of the college walked into Ankang Kangyuan Pharmaceutical Technology Co., Ltd. to visit, visit the guidance, at 14 o'clock in the afternoon, the leaders of Palm Creek Town and industry representatives drove to Kangyuan Pharmaceutical Technology Co., Ltd., in order to fully understand Ankang Kangyuan Pharmaceutical Technology, just arrived at the destination Kangyuan Pharmaceutical Chairman Lv Shengbo and business department manager Lu Sufang accompanied by visiting the production plant of Kangyuan Pharmaceutical